Installing the TWAIN/WIA Driver
TWAIN/WIA driver must be installed on your computer to scan documents in an application that supports TWAIN/WIA.
To use the scanner of the machine in an application that supports TWAIN, install the TWAIN driver and register the machine in "Network Connection Tool".
To import images into the computer directly, you need to install both the TWAIN driver and the application that supports TWAIN.
You can scan a document in WIA format only when the machine is connected to your computer via USB.
Installing the TWAIN/WIA Driver
Start the installer of the TWAIN/WIA driver.
To start the installer from the CD-ROM
Set the CD-ROM in the computer.
If the installer does not start automatically, double-click [Setup.exe] in the root directory of the CD-ROM.
Click [Network TWAIN Driver] or [USB TWAIN/ USB WIA Driver] on the installer screen.
To execute the downloaded file
Double-click the downloaded file.
Specify the location of the unzipped file, and then click [OK].
If the "Security Warning" screen is displayed, click [OK].
If the "User Account Control" screen is displayed, click [Yes] or [Allow].
On the setup screen, click [Next].
On the "License Agreement", select [I accept the terms of the license agreement], and then click [Next].
On the "Select Program Folder" screen, click [Next].
Installation starts.
After completing the installation, click [Finish].
Setting the Connecting Scanner
To use only the scanner of the machine, or if the machine is not detected automatically, register the machine in "Network Connection Tool".
On the application menu of the computer, click [Network Connection Tool] on [TypeGeneric TWAIN V5].
Select the [Specify scanner(s) to use.] check box, and then click [Scanner Search/Registration].
The tool searches for the scanner.
On the "List of Search Results" screen, select the machine and click [OK].
If the machine is not detected, cancel search, click [Manual Entry], and then enter the IP address of the machine.
Confirm that the machine is added to "List of Specified Scanners", and then click [OK].