Copying at the Image Quality Suitable for the Original
Specify the type of original, whether it is comprised mostly of text or contains photos (Original Type). Also, adjust the image density to copy the original at better quality.
Specifying the Original Type
Press [Copy] on the Home screen.
Press [Original Type] on the Copy screen.
If the key is not displayed, select it from [Original Setting].
Select the original type.
When you select [Text/Photo], further select [Printed Photo] or [Copied Photo].
When you select [Photo], further select [Printed Photo] or [Glossy Photo].
Place the original.
Press [Start].
If the shaded parts of your copies appear uneven, select [Text] or [Photo] for a smoother printout.
Adjusting the Image Density
There are three methods for adjusting the image density as described below.
Adjusting Method | Settings | Results |
|---|---|---|
Adjust the contrast of the entire original. | Adjust the image density manually. |  |
Decrease the base color of the original. | Adjust the image density automatically. |  |
Adjust the contrast of the part from which the base color of the original is deleted. | Combine the manual and automatic image density adjustments. |  |
Press [Copy] on the Home screen.
Press [Density] on the Copy screen.
If the key is not displayed, select it from [Original Setting].
Adjusting the image density
To adjust the density of the entire original manually, drag
right and left. Dragging to the left decreases the density, and to the right increases it.To decrease the base color of the original, select the [Auto Density] check box.
To adjust the contrast of the part from which the base color of the original is deleted, adjust the density by dragging
right and left, and then select the [Auto Density] check box.
Place the original.
Press [Start].
You can also adjust the image density by dragging
on the [Density] key right and left on the Copy screen.