Copying Mixed-size Originals
You can place mixed-size originals in the ADF at the same time and copy them (Mixed Sizes).
For details about the sizes of originals that you can place in the ADF by Mixed Sizes, see the following sections:
Recommended Original Size and Weight
When placing originals of different sizes in the ADF without specifying [Mixed Sizes], paper may become jammed or parts of the original may not be copied.
Press [Copy] on the Home screen.
![Operation panel screen illustration](../../copy/image/icon_homescreen_en_mts006.gif)
Press [Original Size] on the Copy screen.
![Operation panel screen illustration](../../copy/image/met3cpy-en019.gif)
If the key is not displayed, select it from [Original Setting].
Press [Mixed Sizes].
![Operation panel screen illustration](../../copy/image/ebw206.gif)
Adjust the original guide on the ADF to the widest original size.
Place the original in the ADF.
Align the rear and left edges of the original as shown below.
![Illustration of placing mixed sizes](../../copy/image/dzb250.gif)
When you copy combining [Mixed Sizes] and [1 Sided
2 Sided], be sure to set an original of the same size for the front and back sides. If the size of the original cannot be the same, insert a blank sheet for adjustment.
Press [Start].
It takes more time to print or read.