Copying Both Sides of an ID Card onto a Single Page
You can copy the front and back sides of a small original such as an ID card or name card onto one side of a sheet of paper (ID card copy).
![Illustration of copying an ID card](../../copy/image/dzb245.gif)
You can also copy an ID card by pressing "ID Card Copy" on the Home screen. This section describes how to copy on the Copy screen.
You cannot specify the ID card copy together with the Duplex Copy. If the Duplex Copy is specified, press the [Reset] to cancel the setting.
Press [Settings] on the Home screen.
![](../../copy/image/icon_homescreen_en_mts012.gif)
Press [Machine Features Settings] on the Settings screen.
![](../../copy/image/ebw220.gif)
Press [Copier Settings]
[General Features]
[Customize Function: Copy (Standard Mode)].
Press a blank function key, and then select [ID Card Copy].
Press [OK].
Press [Home] (
) after specifying the settings.
Press [Copy] on the Home screen.
![Operation panel screen illustration](../../copy/image/icon_homescreen_en_mts006.gif)
Press [ID Card Copy] on the Copy screen.
![Operation panel screen illustration](../../copy/image/met3cpy-en015.gif)
The setting of [Paper Select] changes automatically. To copy on a different paper, change the setting.
Press [ID Card CopyTo Next].
![Operation panel screen illustration](../../copy/image/ebw205.gif)
Place the ID card with the front side facing down on the exposure glass.
When copying onto paper in portrait orientation (
), place the ID card in landscape orientation and in the center of the scan area that is half the size of the paper to copy onto.
Example: To copy onto A4 (81/2 × 11)
size paper, place the card in the center of the scan area for A5 (51/2 × 81/2)
size original.
When copying onto paper in landscape orientation (
), place the card in portrait orientation and in the center of the scan area that is half the size of the paper to copy onto.
Example: To copy onto A4 (81/2 × 11)
size paper, place the card in the center of the scan area for A5 (51/2 × 81/2)
size original.
Press [Start].
The front side of the ID card is scanned.
Place the ID card with the back side facing down on the exposure glass, and press [Start].
Place the ID card in the same scan area as the front side. When you press [Start], the back side of the ID card is scanned.
![Illustration of placing an ID card](../../copy/image/dzb248.gif)
Press [Finish].
To copy the next ID card, press [Continue Copying].