Removing Printing Jams
- When replacing paper or removing jammed paper, make sure not to trap or injure your fingers.
- There are highly-heated parts inside the machine. When removing misfed paper, do not touch areas other than those specified in this manual. Touching those areas can result in burns.
- Some of the internal components of this machine might be fragile. When you remove jammed paper, do not touch the sensors, connectors, LEDs, or other fragile parts that are shown in this manual. Doing so may cause malfunctions.
For the location of the sensors in the machine and extended options, see the following illustrations.
1.
2.
3.
When clearing misfeeds, do not turn off the power switch. If you do, your copy settings are cleared.
To prevent misfeeds, do not leave any torn scraps of paper inside the machine.
If paper misfeeds occur repeatedly, contact your service representative.
More than one misfeed area may be indicated. If this is the case, check every applicable area. Refer to the following charts: A, B, C, Y, Z.
You can find a sticker explaining how to remove misfed paper inside the right cover.
When the machine instructs you to reset originals, reset them in the feeding position. The display will show you the number of originals to return.
