Replacing the Print Cartridge

Store print cartridge in a cool dark place.
Actual printable numbers vary depending on image volume and density, number of pages printed at a time, paper type and size, and environmental conditions such as temperature and humidity. Toner quality degrades over time. Early replacement of the print cartridge might be necessary. Therefore, we recommend you always keep a new print cartridge ready.
For good print quality, the manufacturer recommends that you use genuine toner from the manufacturer.
The manufacturer shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the manufacturer with your office products.
Do not allow paper clips, staples, or other small objects to fall inside the machine.

Messages on the screen

Replace the print cartridge when “Replacement Required: Print Cartridge” appears on the screen.
Prepare a new print cartridge when “Replace Required Soon: Print Cartridge” appears on the screen.

Open the front cover of the machine.

Lift the green lever.

Push the green lever, and then gently pull out the holder.

Press the print cartridge back to raise its top, and then gently pull it out.

Do not shake the removed print cartridge. Doing so can cause remaining toner to leak.
Place the old print cartridge on paper or similar material to avoid dirtying your workspace.

Prepare the new print cartridge.

Hold the new print cartridge horizontally and shake it from side to side five or six times.

Remove the black cap.

Put the print cartridge on the holder, and then pull its top forward.

Push in the green lever until it clicks.

Check that the green lever returns to its original position.

Press down the green lever.

Close the machine's front cover.

Put the old print cartridge into the bag, and then put it into the box.

If you want to discard your used toner container, please contact your local sales office. If you discard it by yourself, treat it as general plastic waste material.