Registering a New User Code
Start the web browser and access the machine by entering its IP address.
The top page of Web Image Monitor appears.
Click [Restrict Available Functions].
Enter the administrator password if required, and then click [Apply].
Select the [Available Functions per User] tab.
Select the entry to register, and then click [Change].
Register information as necessary.
User Name can contain up to 16 characters.
User Code can contain up to 8 characters.
When the [Copying] or [Printing] check box is selected, the user is allowed to use the function.
Click [Apply].
Click [Logout].
Close the web browser.