User GuideIM 350/430 series

Starting an extended feature from the control panel

1Display the Extended Feature Settings screen.

For displaying the Extended Feature Settings screen, see Displaying and Quitting the Extended Feature Settings on the Control Panel.

2Select the extended features you want to start, whose "Status" is "Stop", "Suspend", or "Ending".

Operation panel screen illustration

Depending on the type and status of the extended features you select, the machine responds as follows:

Type-J extended features

  • When the Type-J extended feature icons are displayed on the Home screen:

    The extended feature's "Status" does not change to "Starting Up" while the Extended Feature Settings screen is displayed. Start the extended feature from the Home screen when its "Status" is "Suspend".

    • If "Suspend" is displayed:

      Press the extended feature's icon on the Home screen to start the feature.

    • If "Stop" is displayed:

      The extended feature's "Status" changes to "Suspend". Press the extended feature's icon on the Home screen to start the feature.

  • When the Type-J extended feature icons are not displayed on the Home screen:

    The extended feature's "Status" changes from "Stop" to "Starting Up".

Type-C extended features

  • If "Ending" is displayed:

    The extended feature's "Status" changes to "Starting Up".

  • If "Stop" is displayed:

    The extended feature's "Status" changes to "Waiting".

    After the machine is rebooted, the "Status" changes to "Starting Up".

    If you select the same extended feature again without rebooting the machine, the "Status" changes back to "Stop".

3Press [Exit].

Note

  • If "Waiting" is displayed, the extended features start and become usable after the machine is rebooted.