User GuideIM 350/430 series

Adjusting the Volume When You Use the Fax Function

You can change the volume of the following sounds that the machine makes.

On Hook Mode

Heard when [On Hook] is pressed.

At Transmission

Heard when "Immediate Transmission" is performed.

At Reception

Heard when the machine receives a document.

At Dialing

Heard after [Start] is pressed until the line connects to the destination.

1Press [Home] (Home Key Illustration) at the bottom of the screen in the center.

2Flick the screen to the left, and then press the [User Tools] icon (User Tools Icon Illustration).

3Press [Machine Features].

4Press [Fax Features].

5Press [General Settings].

6Press [Adjust Sound Volume].

Operation panel screen illustration

7Press [Lower] or [Louder] to adjust the volume, and then press [OK].

You can hear the actual volume by pressing [Check].

You can set the volume level to between 0 and 8.

8Press [User Tools] (User Tools Key Illustration) on the top right of the screen.

9Press [Home] (Home Key Illustration) at the bottom of the screen in the center.

Note

  • You can adjust the On Hook volume when you press [On Hook]. For details about how to adjust the On Hook volume, see "On Hook Dial", Fax.