Connecting the Telephone Line 
(mainly North America)
To connect the machine to a telephone line, use a snap-in modular type connector.
- A telephone line cable with a ferrite core must be used for RF interference suppression.
Make sure the connector is the correct type before you start.
Connect the public switched telephone network (PSTN) to Line. Connecting lines other than PSTN to this machine may cause it to malfunction.
G3 interface unit connector
Connect a telephone line.
External telephone connector
Connect the optional handset or an external telephone.
If a cap has been inserted in the "TEL" connector, remove it before starting to use this connector.
Use the supplied modular cable with a ferrite core. Connect the end of the cable with the ferrite core to the machine.
