User GuideIM 350/430 series

Current Machine Status

This section explains how you can check the machine's status and the items displayed. Depending on the options installed on the machine, some items might not be displayed.

  • UNIX: Use the "stat" parameter and the "rsh", "rcp", and "ftp" commands. "rsh" and "rcp" cannot be used in a Windows environment.

  • telnet: Use the "status" command.

Check the error contents that may be printed in the configuration page.

Messages

Description

Call Service Center

There is a malfunction in the machine.

Canceling Job...

The job is being reset.

Check Paper: Bypass Tray

Check that the paper size, orientation, and paper type are correct.

Configuring...

Setting is being changed.

Cover Open: Front Cover

The front cover is open.

Current Job Suspended

The current job is suspended.

Empty: Toner

The toner cartridge is empty.

Energy Saver Mode

The machine is in Energy Saver mode.

Error: Ethernet Board

An Ethernet board error has occurred.

Error: HDD Board

A hard disk drive board error has occurred.

Error: Optional Font

An error has occurred in the font file of the machine.

Error: Parallel I/F Board

An error has occurred in the parallel interface.

Error: PDL

An error has occurred in the page description language.

Error: USB Interface

An error has occurred in the USB interface.

Error: Wireless Card

The optional wireless LAN board is removed after startup.

Full: Waste Toner

Waste Toner is full.

Hex Dump Mode

It is a hex dump mode.

Independent-supplier Toner

Toner cartridges other than genuine ones are set.

Jobs Suspended

All jobs are suspended.

Loading Toner…

Toner is being supplied.

Low: Toner

Toner is almost running out.

Malfunction: Bypass Tray

There is a problem with the bypass tray.

Malfunction: Tray 1

There is a problem with Tray 1.

Malfunction: Tray 2

There is a problem with Tray 2.

Malfunction: Tray 3

There is a problem with Tray 3.

Malfunction: Tray 4

There is a problem with Tray 4.

Mismatch: Paper Size

Indicated paper tray does not contain paper of selected size.

Mismatch: Paper Size and Type

Indicated paper tray does not contain paper of selected size and type.

Mismatch: Paper Type

Indicated paper tray does not contain paper of selected type.

Nearly Full: Waste Toner

Waste Toner is nearly full.

No Paper: Selected Tray

There is no paper in the specified tray.

Not Detected: Drum Unit

The drum unit is not correctly set.

Not Detected: Fuser Unit

The fusing unit is not correctly set.

Not Detected: Input Tray

There is no paper in the specified tray or the paper tray is not correctly set.

Offline

Machine is offline.

Paper in Duplex Unit

The paper remains in the duplex unit.

Paper Misfeed: Bypass Tray

The paper has jammed in the bypass Tray.

Paper Misfeed: Duplex Unit

The paper has jammed in Duplex Unit.

Paper Misfeed: Internal Path

The paper has jammed inside the machine.

Paper Misfeed: Tray 1

The paper has jammed in Tray 1.

Paper Misfeed: Tray 2

The paper has jammed in Tray 2.

Paper Misfeed: Tray 3

The paper has jammed in Tray 3.

Paper Misfeed: Tray 4

The paper has jammed in Tray 4.

Printing...

Printing is in progress.

Proxy User/Password Incorrect

The proxy user name and/or password setting is incorrect.

Ready

The machine is ready to print.

Renewing Remote Certificate

The remote certificate is being renewed.

SD Card Authentication failed

SD card authentication failed.

Supplies Order Call failed

The supply order call has failed.

Tray Error: Duplex Printing

Selected paper tray cannot be used for duplex printing.

Warming Up...

The machine is warming up.