User GuideIM 350/430 series

diprint

The direct printing port enables direct printing from a network-connected computer.

Use the "diprint" command to change direct printing port settings.

View settings

The following command displays the current direct printing port settings:

msh> diprint

Example output:

port 9100

timeout=15(sec)

bidirect on

conn multi

apl async

  • The "port" specifies the port number of the direct printing port.

  • The "bidirect" setting indicates whether the direct printing port is bidirectional or not.

Bidirectional communication settings

msh> diprint bidirect {on|off}

  • The default is "on".

Setting timeout

msh> diprint timeout [5–65535]

  • You can specify the timeout interval to use when the machine is expecting data from the network.

  • The default is 15 seconds.

  • This command functions in conjunction with the "lpr" command.

Specifying the number of concurrent connections

msh> diprint conn {multi|single}

  • The above command specifies the number of concurrent diprint connections. Specify "multi" for multiple connections or "single" for a single connection.

  • The default is "multi".