User GuideIM 350/430 series

dhcp

Use the "dhcp" command to configure DHCP settings.

View settings

The following command displays the current DHCP settings.

msh> dhcp

Configuration

You can configure DHCP.

msh> dhcp "interface_name" {on|off}

  • Specify "on" to enable dhcp. Specify "off" to disable DHCP.

  • If the DNS server address and domain name are obtained from DHCP, be sure to specify {on}.

  • wlan can be specified only when the optional wireless LAN board is installed.

Interface name

Interface configured

ether

Ethernet interface

wlan

Wireless LAN interface

Current interface priority configuration display

msh> dhcp priority

Interface priority configuration

msh> dhcp priority "interface_name"

  • You can select which interface has DHCP parameter priority.

  • Priority settings are available when multiple interfaces are installed.

DNS server address selection

msh> dhcp dnsaddr {dhcp|static}

  • Specify whether to obtain the DNS server address from the DHCP server or use the address set by a user.

  • To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set by a user, specify "static".

Domain name selection

msh> dhcp "interface_name" domainname {dhcp|static}

  • Specify whether to obtain the domain name from the DNS server or use the domain name set by a user.

  • To obtain the domain name from the DHCP server, specify "dhcp". To use the domain name set by a user, specify "static".

DHCP Option 204 configuration and display

Use the following command to display the current setting.

msh> dhcp 204

Use the following command to configure DHCP Option 204.

msh> dhcp 204 {on|off}