User GuideIM 350/430 series

Using the Installation Shell Script

The installation shell script helps with the setup process. The installation shell script automates some of the tasks in configuring/etc/hosts, /etc/printcap; creating the spool directory for BSD UNIX; and running the lpadmin command for System V UNIX.

Important

  • Download the installation shell script from our Web site. Keep the installation shell script as local folders.

  • The installation shell script can be used on the following workstations: (it cannot be used with other types of workstations.)

    • SunOS 4.1.4

    • Solaris 2.6, 7, 8, 9

    • HP-UX 11.x

    • Red Hat Linux 6.2, 7.0, 7.1, 7.2, 8

    • UnixWare 7.1.1

    • OpenServer 5.06

Note

  • Depending on security settings when installed, rsh/rcp/telnet may not be usable with Red Hat 7.1 or later. Change the security level to allow use of rsh/rcp/telnet. For details about how to change the setting, see the operating instructions for Red Hat.

  • When you use NIS (Network Information Service) or DNS, you should configure the server before running the installation shell script.

  • Installation shell script does not support CUPS.

  • When you use Solaris and HP-UX, you can set UNIX configuration with admintools that came with Solaris and HP-UX. For details about setting using the admintools, see the admintool's manual.

  • For details about the configuration utility of your operating system, see the manual that came with the utility.