User GuideIM 350/430 series

Cleaning the Power Cord Plug

WARNING

  • To prevent fire or electric shock, disconnect the plug and the power cord from the wall outlet at least once a year and check them. If any of the following conditions exist, do not use the plug and the power cord continuously, and consult your dealer or service representative.
    • There are burn marks on the plug

    • The prongs on the plug are deformed

    • The power cord's inner wires are exposed or broken

    • The power cord's coating is cracked, dented, or damaged

    • When the power cord is bent, the power turns off and on

    • Part of the power cord becomes hot

CAUTION

  • Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.

Important

  • Turn off the main power switch before unplugging the power cord. See. “Turning On/Off the Main Power”, For First-time Users.

  • Fax files in memory are deleted an hour after you turn off the main power switch.

Note

  • After cleaning the power cord plug, make sure that the power cord is connected to the machine firmly, and then connect the plug to the wall outlet.