User GuideIM 350/430 series

How to Replace the Dustproof Filter

Important

  • Be careful not to stir up the dust on the old dustproof filter.

1Take out the new dustproof filter (two sheets) from the bag.

2Check the position of the vents on the left and right side of the machine.

The procedure for replacing the dustproof filter is same for left and right side. This section describes the procedure of the left side for example.

Ventilation hole illustration

3Open the rear cover to stop the fans.

Rear cover illustration

4Vacuum the dust on the filter cover.

Filter cover illustration

5Slightly push down the filter cover, and remove it.

Filter cover illustration

6Remove the filter.

Put the used dustproof filter in the bag that the new dustproof filter was in.

Dustproof filter illustration
Dustproof filter illustration

7Vacuum the dust on the ventilation hole.

Ventilation hole illustration

8Remove the release paper from new dustproof filter, and attach it so that it covers whole vents.

Attach the dustproof filter with its adhesive tape parts up.

Dustproof filter illustration
Dustproof filter illustration
Dustproof filter illustration

9Attach the filter cover.

Insert the tab located on the lower position of the filter cover to the machine, and then push the upper position until it clicks.

Filter cover illustration

10Replace the filter on the right side by following steps 4 to 9.