User GuideIM 350/430 series

How to Replace the Transfer Roller

Important

  • Close all paper trays and optional paper feed units before opening the front cover.

1Take out the new transfer roller and the gloves from the box.

Put the new transfer roller on a level surface.

2Press the front cover open button on the right side of the machine to open the front cover.

Front cover illustration

3Hold the handle of the combined unit with both hands, and then pull it out.

Do not touch the lock lever when pulling out the combined unit.

Spread a piece of paper on a level surface and then place the combined unit on top of it.

Combined unit illustration

4Put on the gloves.

5Wipe the front part of the transfer roller with a soft, wet cloth after wringing it tightly.

Wipe the part from inwards to outwards and remove any paper dust or toner.

Inner machine illustration
Inner machine illustration

6Pull down the transfer roller cover.

Inner machine illustration

7Remove the transfer roller.

Put the used transfer roller in the bag which the new transfer roller was in.

Transfer roller illustration

8Put the transfer roller onto the transfer roller cover.

Transfer roller illustration

Do not put the transfer roller on the place shown below.

Inner machine illustration

9Push the transfer roller cover.

Inner machine illustration

10Push the transfer roller cover until it clicks.

Inner machine illustration

11Take off the gloves.

12Hold the handle of the combined unit with both hands, and then insert it along the rails.

Conbined unit illustration

13Close the front cover.

Front cover illustration