User GuideIM 350/430 series

Saving Energy

This machine has the following energy saving functions.

Fusing Unit Off mode

If you do not use the machine for a certain period after an operation, the machine makes a clicking sound and enters Fusing Unit Off mode.

When the machine is in Fusing Unit Off mode, the display is on but the fusing unit heater is off to save energy. In this mode, you can scan documents, send faxes, receive faxes into memory, and change the machine's settings on the control panel. However, the machine must exit this mode to print.

You can change the amount of time that the machine waits before switching to Fusing Unit Off mode under [Fusing Unit Off Mode (Energy Saving) On/Off]. For details, see "Timer Settings", Settings.

To exit Fusing Unit Off mode, do one of the following:

  • Start print jobs

  • Switch to the [Copy] screen

  • Touch the display panel when the [Copy] screen is displayed

Sleep mode

If the machine remains inactive for a specified period or [Energy Saver] (Operation panel screen illustration) is pressed, it enters Sleep mode to further reduce the electricity it consumes. For details, see "System Settings", Settings.

You can change the amount of time that the machine waits before switching to Sleep mode under [Sleep Mode Timer]. For details, see "Timer Settings", Settings.

To exit Sleep mode, do one of the following:

  • Lift the ADF

  • Place an original in the ADF

  • Touch the display panel

Note

  • When a machine is in Fusing Unit Off mode, the main power indicator is lit. In Sleep mode, the main power indicator flashes slowly.

  • The energy saving functions will not operate in the following cases:

    • When fixed warm-up is in progress

    • When operations are suspended during printing

    • When a warning message appears (The machine enters Fusing Unit Off mode unless the cover is open.)

    • When paper is jammed (The machine enters Fusing Unit Off mode except when the cover is open.)

    • When the Data In indicator is lit or flashing (The machine enters Fusing Unit Off mode except when the Data In indicator is lit or flashing due to receiving faxes or storing documents.)

  • The machine does not enter Sleep mode in the following cases:

    • During communication with external equipment

    • When the hard disk is active

    • When the service call message appears

    • When the ADF, machine's cover, or ADF cover are opened

    • When the “Add Toner” message appears

    • When toner is being replenished

    • When one of the following screens is displayed:

      • Machine Features

      • Counter

      • Inquiry

      • Address Book Management

      • Tray Paper Settings

    • When data is being processed

    • When the On-hook dialing function is in use

    • If a file is waiting to be transmitted within the next minute using the "Send Later" facsimile function

    • When a recipient is being registered in the address list or group dial list

    • When the sample print, locked print, hold print, or stored print screen is displayed

    • When the screen of a document that was stored under the printer function appears

    • When the internal cooling fan is active

    • When accessing the machine using Web Image Monitor

    • When the handset is in use Region B icon(mainly North America)