User GuideIM 350/430 series

Updating Applications

The procedure to update applications is described below.

You can update all applications together or select them separately.

Important

  • If administrator authentication is specified, only the device administrator can update the applications. To log in to the machine as the machine administrator, see "Administrator Login Method", Security.

1If updates are available for some applications, a message appears in the upper part of the screen for several seconds when the application list screen is displayed.

Operation panel screen illustration

2Press [Update].

3Press [Update All] to update all the applications that are displayed. Press [Update] of each application to update only some of them.

A confirmation message to update the firmware is displayed if the firmware of the machine needs to be updated to perform an application update. Follow the instructions on the screen. You can apply the update immediately or specify the time to apply the update. You can change or cancel the specified time later.

4On the confirmation screen, press [Update].

A message appears when the installation is completed.

5Press [Close].

Note

  • Even after the message in Step 1 disappears, you can open the screen in Step 3 by pressing Admin. Menu, which is displayed in the upper right corner of the application list screen. The number of applications that can be updated is displayed to the right of [Admin. Menu].

  • Operation panel screen illustration