User GuideIM 350/430 series

Changing the Settings of the Program

You can change the settings of the program and overwrite the exiting program.

Standard Applications/Quick Applications

1Recall a program.

For details, see Recalling a Stored Program.

2Edit the settings so all functions you want to store in a program are selected.

3Press [Menu] (Operation panel screen illustration) at the bottom of the screen in the center.

4Press [Reg. Current Setting to Program].

5Press the program number you want to change.

6Press [Program].

7Enter the program name.

8Select the icon for the program.

9Press [Prev. Screen].

When using the quick application, press [Back].

10Press [OK].

11Press [Place].

Even if you select [Do not Place], you can add shortcuts to the program to the [Home] screen after changing the settings of the program is complete.

12Press [Exit].

Classic Applications

1Recall a program.

For details, see Recalling a Stored Program.

2Edit the settings so all functions you want to store in a program are selected.

3Press [Recall/Program/Change Program] on the bottom left of the screen.

4Press [Program].

5Press the program number you want to change.

6Press [Yes].

7Enter the program name.

8Press [OK].

9Press [Exit].

Note

  • When it is overwritten, the previous program is deleted.

  • You can change the settings of a program and then save it as a new program. When you are using the Classic Applications, press a program number without . When you are using the standard applications or quick applications, press a program number with [Not Programmed] displayed next to it.