User GuideIM 350/430 series

Changing the Paper Size in Trays

The paper size setting is changed in the same way for every paper tray.

Important

  • Slide the side fences until they are aligned with the sides of the paper. If there is space between the side fences and the paper, it may cause the image to be misaligned.

1Pull the paper tray carefully until it stops. Lift the front side of the tray, and then pull it out of the machine.

Main unit illustration

2Remove any paper that is in the tray.

Paper tray illustration

3Pinch the lever of the back fence and align it with the paper size. Next, pinch the lever of the right fence and align the right and left fences with the paper size.

Paper tray illustration

4Load the new paper stack print side down.

Paper tray illustration

Do not stack paper over the limit mark.

5Rotate the paper size dial, which is located at the front right of the tray, so that the size and the feed direction of the paper in the paper tray can be seen from the window.

Select "*" if the paper size you loaded is not on the dial.

Paper tray illustration

6Lifting the front side of the tray, insert it into the machine, and then push it in carefully until it stops.

Main unit illustration