User GuideIM 350/430 series

SMTP Authentication

This section describes how to register SMTP Authentication.

For each user registered in the Address Book, you can register a login user name and login password to be used when accessing an SMTP server.

To use an SMTP server, you need to program it beforehand.

Important

  • When [Do not Specify] is selected for SMTP Authentication, the User Name and Password that you have specified in SMTP Authentication of File Transfer settings are applied. For details, see "File Transfer", Settings.

  • If User Authentication is specified, contact your administrator.

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Flick the screen to the left, and then press the [Address Book Management] icon.

3Check that [Program / Change] is selected.

4Press the name you want to register or enter the registered number using the number keys.

You can search by the registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination.

5Press [Auth. Info].

6Press [Specify Other Auth. Info] under "SMTP Authentication".

7Press [Change] under "Login User Name".

Operation panel screen illustration

8Enter the login user name, and then press [OK].

You can enter up to 191 characters for the user name.

9Press [Change] under "Login Password".

10Enter the password, and then press [OK].

You can enter up to 128 characters for the password.

11Enter the password again to confirm, and then press [OK].

12Press [OK].

13Press [User Tools] (Operation panel screen illustration) on the top right of the screen.

14Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.