Registering an FTP Folder
If User Authentication is specified, contact your administrator.
Press [Home] (
) at the bottom of the screen in the center.
Flick the screen to the left, and then press the [Address Book Management] icon.
Check that [Program / Change] is selected.
Select the name whose folder you want to register.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination.
Press [Folder].
Press [FTP].
Press [Yes].
Press [Change] under "Server Name".
Enter the server name, and then press [OK].
You can enter a server name up to 64 characters.
Press [Change] under "Path".
Enter the path, and then press [OK].
You can enter an absolute path, using this format: "\user\ home\username"; or a relative path, using this format: "directory\sub-directory".
If you leave the path blank, the login directory is assumed to be the current working directory.
You can also enter an IPv4 address.
You can enter a path up to 256 characters (256 bytes).
To change the port number, press [Change] under "Port Number".
Enter the port number using the number keys, and then press the [
] key.
You can enter 1 to 65535.
Press [Connection Test] to check the path is set correctly.
Press [Exit].
If the connection test fails, check the settings, and then try again.
Press [Auth. Info], and then press [
Next].
Press [Specify Other Auth. Info] on the right side of "Folder Authentication".
When [Do not Specify] is selected, the FTP User Name and FTP Password that you have specified in "Default User Name / Password (Send)" of File Transfer settings are applied. For details, see "File Transfer", Settings.
Press [Change] under "Login User Name".
Enter the login user name, and then press [OK].
You can enter up to 64 alphanumeric characters for the user name.
Press [Change] under "Login Password".
Enter the password, and then press [OK].
You can enter up to 64 alphanumeric characters for the password.
Enter the password again to confirm, and then press [OK].
Press [OK].
Press [User Tools] (
) on the top right of the screen.
Press [Home] () at the bottom of the screen in the center.
To register the name, see Registering User Information to the Address Book.