Locating the SMB folder manually
Press [Change] under "Path".
Enter the path where the folder is located.
You can enter a path up to 256 characters (256 bytes).
Enter the path using this format: "\\ServerName\Share- Name\PathName".
For example: if the name of the destination computer is "User", and the folder name is "Share", the path will be \\User\Share.
![Operation panel screen illustration](../../intro/image/grnet032.gif)
You can also enter an IPv4 address.
If the network does not allow automatic obtaining of IP addresses, include the destination computer's IP address in the path. For example: if the IP address of the destination computer is "192.168.0.191", and the folder name is "Share", the path will be \\192.168.0.191\Share.
Press [OK].
If the format of the entered path is not correct, a message appears. Press [Exit], and then enter the path again.