User GuideIM 350/430 series

Procedure for Sending at a Specific Time (Classic)

1Press [TX Mode].

Operation panel screen illustration

2Press [Send Later].

3Enter the time, and then press [Sharp].

Region A icon(mainly Europe and Asia)

Enter the time (24 hour format) using the number keys.

Region B icon(mainly North America)

Enter the time using the number keys, and then select [AM] or [PM].

When entering numbers smaller than 10, add a zero at the beginning.

4Press [OK] twice.

Note

  • You can specify a time within 24 hours of the current time.

  • If the current time shown is not correct, change it using [Set Time] under [System Settings]. For details about the setting, see "Timer Settings", Settings.

  • You can cancel the transmission setup for Send Later. See Canceling a Transmission After the Original Is Scanned.