User GuideIM 350/430 series

Input / Output

This section describes the user tools in the Input / Output menu under [Copier / Document Server Features].

Switch to Batch

You can select to have Batch mode or SADF mode displayed when you press [Original Settings].

Default: [Batch]

SADF Auto Reset

In SADF mode, an original must be placed within a specified time after the previous original has been fed.

Default: [5 second(s)]

You can adjust this time from 3 to 99 seconds in increments of 1 second.

Memory Full Auto Scan Restart

When memory becomes full while scanning originals, the machine can make copies of scanned originals first, and then automatically proceed scanning remaining originals.

Default: [Off]

  • On

    You can leave the machine unattended to make copies, but sorted pages will not be sequential.

  • Off

    When memory becomes full, the machine stops operation allowing you to remove the copy pages delivered on the output tray.

Letterhead Setting

If you select [Yes] in this function, the machine rotates the image correctly.

Default: [No]

Orientation-fixed (top to bottom) or two-sided paper might not be printed correctly depending on how the originals and paper are placed. For details, see "Loading Orientation-fixed Paper or Two-sided Paper", For First-time Users.

Note