User GuideIM 350/430 series

Page Numbering (Copier / Document Server Features)

This section describes the user tools in the Page Numbering menu under [Stamp].

Stamp Format

You can select the page number format given priority when [Page Numbering] is pressed.

Default: [P1,P2...]

Font

You can select the font in Page Numbering mode.

Default: [Font 1]

Size

You can select the size of the stamp printed in Page Numbering mode.

Default: [Auto]

Duplex Back Page Stamping Position: T to T

You can select the position of the duplex back page number printed in Duplex mode.

The page numbers are printed on the same edges on both sides of paper.

Default: [Opposite Position]

Duplex Back Page Stamping Position: T to B

You can select the position of the duplex back page number printed in Duplex mode.

The page numbers are printed on the opposite edges on both sides of paper.

Default: [Same Position]

Page Numbering in Combine

You can select page numbering when using the Combine function and the Page Numbering function together.

Default: [Per Original]

Stamp on Designating Slip Sheet

You can select whether or not to print the page number onto slip sheets when using the Designate function set to "Copy" and the Page Numbering function together.

Default: [Off]

Stamp Position

Specify how each of stamps is printed.

  • Stamp Position

    Specify where to print the stamp. For details about the stamp position, see Stamps.

    Default for the patterns of [P1,P2...], [1/5,2/5...], [P.1,P.2...], and [1,2...]: [Top Right]

    Default for the patterns of [-1-,-2-...] and [1-1,1-2...]: [Bottom Center]

  • Adjust Stamp Position

    You can adjust the position in which the stamp is printed.

    The position where the stamp is printed and the range within which that position can be adjusted are shown in the following table. The values for defaults and possible ranges given in the table are the distance from each side of the paper.

    Region A icon(mainly Europe and Asia)

    Stamp positions

    Default

    Possible range

    Top Left

    12 mm from the left edge

    12 mm from the top edge

    From 3 to 118 mm from the left edge

    From 3 to 118 mm from the top edge

    Top Center

    Center

    12 mm from the top edge

    From 0 to 59 mm to the right or left of the center

    From 3 to 118 mm from the top edge

    Top Right

    12 mm from the right edge

    12 mm from the top edge

    From 3 to 118 mm from the right edge

    From 3 to 118 mm from the top edge

    Bottom Left

    12 mm from the left edge

    8 mm from the bottom edge

    From 3 to 118 mm from the left edge

    From 3 to 118 mm from the bottom edge

    Bottom Center

    Center

    8 mm from the bottom edge

    From 0 to 59 mm to the right or left of the center

    From 3 to 118 mm from the bottom edge

    Bottom Right

    12 mm from the right edge

    8 mm from the bottom edge

    From 3 to 118 mm from the right edge

    From 3 to 118 mm from the bottom edge

    Region B icon(mainly North America)

    Stamp positions

    Default

    Possible range

    Top Left

    0.5 inches from the left edge

    0.5 inches from the top edge

    From 0.2 to 4.6 inches from the left edge

    From 0.2 to 4.6 inches from the top edge

    Top Center

    Center

    0.5 inches from the top edge

    From 0 to 2.3 inches to the right or left of the center

    From 0.2 to 4.6 inches from the top edge

    Top Right

    0.5 inches from the right edge

    0.5 inches from the top edge

    From 0.2 to 4.6 inches from the right edge

    From 0.2 to 4.6 inches from the top edge

    Bottom Left

    0.5 inches from the left edge

    0.3 inches from the bottom edge

    From 0.2 to 4.6 inches from the left edge

    From 0.2 to 4.6 inches from the bottom edge

    Bottom Center

    Center

    0.3 inches from the bottom edge

    From 0 to 2.3 inches to the right or left of the center

    From 0.2 to 4.6 inches from the bottom edge

    Bottom Right

    0.5 inches from the right edge

    0.3 inches from the bottom edge

    From 0.2 to 4.6 inches from the right edge

    From 0.2 to 4.6 inches from the bottom edge

Superimpose

You can have page numbers printed in white when they overlap black parts of the image.

Default: [Off]

Page Numbering Initial Letter

You can select the page numbering initial letter between [P1,P2.../P.1,P.2...] and [S1,S2.../S.1,S.2...].

Default: [P1,P2.../P.1,P.2...]

Note