User GuideIM 350/430 series

Slip Sheet

Every time an original page changes, a slip sheet is inserted. You can also print on the inserted slip sheet.

Since a slip sheet is inserted for every page, you can protect printed surfaces. This function is useful in copying onto OHP transparencies.

Illustration of Slip Sheet

Before using this function, select the tray for slip sheets under [Tray Paper Settings] in User Tools. The slip sheets should be the same size and orientation as the copy paper or the OHP transparencies. For details, see "Tray Paper Settings", Settings.

When copying onto OHP transparencies

  • Copy

    Illustration of Slip Sheet
  • Blank

    Illustration of Slip Sheet

1If the Duplex function is selected, cancel the setting.

2Press [Cover/Slip Sheet].

Operation panel screen illustration

3Select [Copy] or [Blank] for the slip sheets, and then press [OK].

Operation panel screen illustration

4Select the main sheet tray that contains the paper to copy the originals.

When copying onto OHP transparencies, use the bypass tray.

Note

  • When loading OHP transparencies on the bypass tray, press [Operation panel screen illustration] and select [OHP (Transparency)] in [Paper Type]. For details, see Copying onto OHP Transparencies.

  • If the type of paper is different between main sheets and slip sheets, copy paper is output in the tray that can stack both sheets.

  • If you do not copy onto slip sheets, they are excluded from the number of copies counted.