User GuideIM 350/430 series

Designate

Use this function to have certain pages of your original copied onto designation sheets or to insert a designation sheet for each page specified.

  • Copy

    Illustration of Designate
  • Blank

    Illustration of Designate

Before using this function, select the tray for designation sheets under [Tray Paper Settings] in User Tools. The designation sheets should be the same size and orientation as the main sheets. For details, see "Tray Paper Settings", Settings.

Important

  • You cannot specify the bypass tray as the main sheet tray.

1Press [Cover/Slip Sheet].

Operation panel screen illustration

2Press [Designate / Chapter].

Operation panel screen illustration

3Select [Designate: Copy] or [Designate: Blank].

4Press the key to select the chapter number.

To select pages 11 to 20 (chapter), press [11–20].

Operation panel screen illustration

5Enter the page location of the first page of the chapter with the number keys, and then press [Sharp].

6To specify another page location, repeat Steps 3 to 5.

Up to 20 locations can be specified.

7Select the main sheet tray that contains the paper to copy the originals.

8Press [OK] twice.

Note

  • If you select [Designate: Blank], the specified pages will be excluded from the copy count.

  • When [1 Sided 2 Sided] has been selected, specified pages will always be copied on the front of copies.