User GuideIM 350/430 series

Erase Center / Border

This function erases the center and/or all four sides of the original image.

Illustration of Erase Center / Border

This function has the following three types:

Erase Border

Erases the edge margin of the original image.

There are two types in the Erase Border mode.

  • Same Width

    Erase the same width of edge margins of the original image.

  • Different Width

    Erase the edge margins of the original image at different widths.

Erase Center

Erases the center margin of the original image.

Erase Center/ Border

Erases both the center and edge margins of the original image.

There are two types in the Erase Center/ Border mode.

  • Same Width

    Erase the same width of edge margins of the original image. However, only the center part of originals can be erased at a different width from the edge.

  • Different Width

    Erase the edge margins and center part of the original image at different widths.

    Erases the edge margins and center part of originals regardless of original orientation.

    Illustration of Erase Center / Border

You can change the width of the erased part in a range from 2 to 99 mm (0.1 to 3.9 inches).

Operation panel screen illustrationWhen Using the Copy Application

Operation panel screen illustration

About how to use the application's screen, see "[Copy] (standard) Screen".

Operation panel screen illustrationWhen Using the Copier (Classic) Application

Note

  • The width of the erased margin varies depending on the reproduction ratio.

  • You can change the settings for the erase width under [Edit] in User Tools. For details, see Edit.