User GuideIM 350/430 series

Procedure for Unauthorized Copy Prevention for Pattern (classic)

1Press [Edit / Stamp].

Operation panel screen illustration

2Press [Stamp].

3Press [Unauthorized Copy Prevention].

4Make sure that [Unathd. Copy Prev.: Patn.] is selected.

Operation panel screen illustration

5Press [Effect].

6Select the effect of the pattern, and then press [OK].

Operation panel screen illustration

7Press [Text Selection].

8Select the text to be embedded, and then press [OK].

When you select [User Text], press [Enter] and specify the text to be embedded.

Operation panel screen illustration

9Press [Text Settings].

10Specify the items displayed on the screen, and then press [OK].

To specify [Point Size], [Text Angle], or [Carriage Return Space], press the key, and then press [Change] on the display.

Operation panel screen illustration

11Press [Mask Type for Pattern].

12Select the mask type to be embedded, and then press [OK].

Operation panel screen illustration

13Press [Pattern Density].

14Press [Lighter] or [Darker] to adjust the density of the pattern, and then press [OK].

15Press [OK] twice.

Note

  • You cannot partially embed texts and patterns strings in a document.

  • Due to the effects of the settings, the results of copying, scanning, and saving documents in the Document Server may vary depending on the machine model and setting conditions.

  • When copying a document with Unauthorized Copy Prevention for Pattern applied, the copy may have partial shading. Change the original type setting to [Text] or [Photo].