User GuideIM 350/430 series

Procedure for copying onto custom size envelope (classic)

Illustration of envelopes

Illustration of horizontal: Horizontal

Illustration of vertical: Vertical

Be sure to include the fully open flap in the horizontal dimension.

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Press the [Copier (Classic)] icon.

3Load the envelope face up in the bypass tray.

The bypass tray paper settings screen is automatically displayed.

When [Do not Display] is selected in [Display Paper Settings in Bypass], the bypass tray paper settings screen is not displayed. In this case, make sure that the bypass tray [Operation panel screen illustration] is selected and press [Sharp]. When [Display Automatically] is selected in [Display Paper Settings in Bypass], even if you press the bypass tray [Operation panel screen illustration] instead of [Sharp], the bypass tray paper settings screen is displayed. For details, see General Features.

4Press [Change Setting].

5Select the [Envelope], and then press the [Next] icon.

6Press [Custom Size].

7Press the [A] text box and enter the size using the soft keyboard, and then press [Done].

8Press the [B] text box and enter the size using the soft keyboard, and then press [Done].

9Press [OK] three times.

10Place the originals, and then press [Start].

Note