User GuideIM 350/430 series

Procedure for copying onto OHP transparencies (classic)

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Press the [Copier (Classic)] icon.

3Load the paper face up in the bypass tray.

The bypass tray paper settings screen is automatically displayed.

When [Do not Display] is selected in [Display Paper Settings in Bypass], the bypass tray paper settings screen is not displayed. In this case, make sure that the bypass tray [Operation panel screen illustration] is selected and press [Sharp]. When [Display Automatically] is selected in [Display Paper Settings in Bypass], even if you press the bypass tray [Operation panel screen illustration] instead of [Sharp], the bypass tray paper settings screen is displayed. For details, see General Features.

4Press [Change Setting].

5Select the [OHP (Transparency)], and then press the [Next] icon.

6Select the paper size and orientation, and then press [OK] twice.

7Place the originals, and then press [Start].

Note

  • When copying onto OHP transparencies, remove copied sheets one by one.

  • For details about the sizes of OHP transparencies that can be used, see "Recommended Paper", Specifications.