Specifications for the Main Unit
Configuration:
Desktop
Hard disk
320 GB or more
Photosensitivity type:
OPC drum
Development:
Dry two-component magnetic brush development system
Fusing:
Heating roll pressure system
Resolution:
1200 × 1200dpi
Warm-up time (23 °C (73.4 °F), rated voltage)
12.9 seconds
The warm-up time may differ depending on the operating environment of the machine.
Paper size:
Tray 1 and the bypass tray:
For details, see Recommended Paper.
Duplex:
A4
, A5
, A6, B5, B6, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 16K, 81/2 × 132/5Duplex (custom size):
Vertical: 148–356 mm (5.83–14.01 inches)
Horizontal: 100–216 mm (3.94–8.50 inches)
If the paper has a horizontal width of more than 297.0 mm, feed the paper from a paper tray unit.
Paper weight:
Trays 1 and the bypass tray: For details, see Recommended Paper.
Duplex: 52–162 g/m2 (14 lb. Bond–90 lb. Index)
For details about and recommendations concerning thick paper, see When Loading Thick Paper.
First print time:
4.3 seconds
(A4, 81/2 × 11, 100% reproduction, feeding from Tray 1)
The first print time may differ depending on the operating environment of the machine.
Print speed:
A4
, 43 sheets/minute81/2 × 11
, 45 sheets/minute
Paper capacity (80 g/m2, 20 lb. Bond):
For details, see Recommended Paper.
Power requirements:
(mainly Europe and Asia)220–240 V, 7 A, 50/60 Hz
(mainly North America)120–127 V, 12 A, 60 Hz
Power consumption
- (mainly Europe and Asia)
Main unit only
Specifications
Ready
79.6 W
During printing
597 W
Maximum
1260 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Specifications
Maximum
1260 W or less
The complete system consists of the main unit, lower paper trays (three unit).
- (mainly North America)
Main unit only
Specifications
Ready
75.1 W
During printing
603 W
Maximum
1360 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Specifications
Maximum
1360 W or less
The complete system consists of the main unit, lower paper trays (three unit).
Dimensions:
W × D × H:
375 × 412 × 311 mm (14.8 × 16.2 × 12.2 inches)
Space for main unit (W × D):
420 × 727 mm (16.6 × 28.7 inches) (Including the bypass tray, rear cover and caster table.)
Noise emission
Sound power level:
Main unit only
Specifications
Stand-by
28.9 dB (A)
Printing
64.5 dB (A)
Complete system
Specifications
Stand-by
29.4 dB (A)
Printing
66.5 dB (A)
Sound pressure level:
Main unit only
Specifications
Stand-by
20.5 dB (A)
Printing
54.2 dB (A)
Complete system
Specifications
Stand-by
20.5 dB (A)
Printing
56.1 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit and three paper tray units.
Weight
Approx. 19.3 kg (42.6 lb.) (Main unit only, including consumables.)
We have obtained each author's permission for the use of applications including open-source software applications. For details about the copyright information for these software applications, see the file in the OSS folder on the CD-ROM supplied with the machine.