User GuideP 501/502

Order of Option Installation

When installing multiple options, the following order is recommended:

1Attach the Lower paper tray (250 sheets) and the Lower paper tray (500 sheets).

You can attach up to three paper feed units by any combination.

2Install the Hard disk.

Install the Hard disk to the install area of the controller board.

3Install the interface board.

Install in the slot of the controller board.

Only one interface board can be installed.

4Insert SD card.

Insert in the SD card slot of the controller board.

There are two slots for SD cards.

Each slot supports different types of SD cards.

If you want to use two or more SD cards that can be inserted in the same slot, contact your sales or service representative.