How to Access Basic Initial Settings
The machine's settings can be done by accessing the initial setup menu from the control panel.
Press the [Menu] key.
Press the [] or [] key to select [Installation Settings], and then press the [OK] key.
Press the selection key beneath [Start], and follow the instructions on the screen.
You can set the following.
Time zone
You can set the time difference in UTC.
Date and time
You can set the date and time.
Daylight saving time
You can set to use or not the daylight saving time and set the start/end day of the daylight saving time.
Network Settings
You can set network settings.
Wireless LAN settings can be specified if the optional wireless LAN interface board is installed.