Connecting in Ad hoc Mode
In Ad hoc mode, you can specify an SSID to the machine, and connect your computer directly to the machine via a wireless LAN.
The Wireless LAN interface board must be installed to use Ad hoc mode.
Press the [Menu] key.
Press the [
] or [
] key to select [Host Interface], and then press the [OK] key.
Press the [] or [] key to select [Network], and then press the [OK] key.
Press the [] or [] key to select [LAN Type], and then press the [OK] key.
Press the [] or [] key to select [Wireless LAN], and then press the [OK] key.
Press the [Escape] key.
Press the [] or [] key to select [Wireless LAN], and then press the [OK] key.
Press the [] or [] key to select [Communication Mode], and then press the [OK] key.
Press the [] or [] key to select [802.11 Ad-hoc Mode], and then press the [OK] key.
Press the [] or [] key to select [SSID Setting], and then press the [OK] key.
Press the selection key beneath [Enter SSID].
Press the selection key beneath [Enter].
Press the [], [], [
] or [
] key to select a character, and then press the [OK] key to enter the SSID.
Press the selection key beneath [Accept] when you finish entering the SSID.
Press the [] or [] key to select [Ad-hoc Channel], and then press the [OK] key.
Press the [], [], [] or [] key to select a channel, and then press the [OK] key.
Press the [] or [] key to select [Security Method], and then press the [OK] key.
Press the [] or [] key to select [WEP], and then press the selection key beneath [Details].
To not use security setting, select [No].
Press the selection key beneath [Enter].
Press the [], [], [] or [] key to select a character, and then press the [OK] key to enter the WEP key.
Press the selection key beneath [Accept].
Press the [] or [] key to select [WEP], and then press the [OK] key.
The settings are complete.
You can connect the device in Ad hoc mode by specifying the SSID, channel, and security method that are specified for the machine.
See the instructions supplied with the device for how to connect it in ad hoc mode.