PS Menu
You can set conditions when using PostScript for printing.
Job Timeout
You can specify how long the machine waits before canceling the current job when the job is interrupted while being processed. If you select Use Machine Setting(s), enter a value between 0 and 999. (Default: 0)
Default: [Use Driver/Command]
Use Driver/Command
Use Machine Setting(s)
Wait Timeout
You can specify how long the machine waits before it denies receiving a job when the machine cannot determine when the job ends. If you select Use Machine Setting(s), enter a value between 0 and 999. (Default: 300)
Default: [Use Driver/Command]
Use Driver/Command
Use Machine Setting(s)
Paper Selection Method
You can specify how the source tray will be selected by specifying the default value for DeferredMediaSelection in PostScript.
Default: [Select Paper Tray]
Auto Select
The default value for DeferredMediaSelection is "true". The source tray that matches the paper setting specified in a print job will be selected.
Select Paper Tray
The default value for DeferredMediaSelection is "false". The source tray will be selected according to the media selection of PostScript Language Reference.
Swtchg btwn 1&2 Sided Prnt
You can specify which side of the paper to print on when the PS command is used to perform duplex printing and the "setpagedevice" command is entered.
Default: [Active]
Inactive
Retains duplex printing, and prints pages after the "setpagedevice" command has been entered on the back side of paper.
Active
Cancels duplex printing, and prints pages after the "setpagedevice" command has been entered on the front side of paper.
Data Format
You can select the data format from Binary Data or TBCP.
This setting is ineffective if a parallel or EtherTalk connection is used.
When binary data is sent from the printer driver when the machine is working with a parallel or USB connection, the print job is canceled.
Default: [TBCP]
Binary Data
TBCP
When an Ethernet connection is used, the print job is canceled if:
The printer driver data format is TBCP and the data format selected using the control panel is Binary Data.
The printer driver data format is binary and the data format selected using the control panel is TBCP.
Resolution
You can specify the resolution.
Default: [600dpi]
300dpi
600dpi
1200dpi
Orientation Auto Detect
You can specify orientation auto detect.
Default: [On]
On
Off
Font Change Confirmation
You can specify whether or not to display the confirmation screen when replacing the font type that cannot be printed.
If [Do not Display] is selected, the font type will be replaced without displaying the confirmation screen and printing will continue.
Default: [Display]
Display
Do not Display