Timer Settings
Auto Reset Timer
You can specify how long the machine waits before it displays the initial screen following last usage (auto resets). This function will be active when the machine is:
Performing normal menu operations.
Displaying a warning message regarding authentication.
If you suspend printing by pressing the [Suspend/Resume] key, the machine will resume printing when the period of time specified by this setting elapses.
If you enable this setting, you can specify the number of seconds the machine waits before it auto resets. Specify a wait time of between 10 and 999 seconds (in increments of 1 second). The default wait time is 60 seconds.
Default: [On]
On
Off
Set Date
You can set the date for the machine's internal clock.
Use the cursor keys to set the current date.
Set Time
You can set the time for the machine's internal clock.
Use the cursor keys to set the current time.
Time Zone
You can specify the standard time in your region. The difference from the international standard time can be set from -12:00 to +13:00 in steps of one minute. Press the selection key beneath [+/-] to switch between + and -. Use the cursor keys to switch between hours and minutes and set the time. Changes will be applied after the machine restarts.
(mainly Europe)
Default: [+1hr.0min.]
(mainly Asia)
Default: [+8hr.0min.]
(mainly North America)
Default: [-5hr.0min.]
Daylight Saving Time
You can specify how long daylight saving time is in effect and how many hours the clocks go forward.
(mainly Europe)
Default: [Active]
(mainly Asia)
Default: [Inactive]
(mainly North America)
Default: [Active]
If you select [Active], specify [Month], [Week], [Day of the Week], [Hour] for the start time and end time.
Start Time/End Time
Month
Select the month to start/end daylight saving time.
(mainly Europe)
Default start time: [March]
Default end time: [October]
(mainly Asia)
Default start time: [October]
Default end time: [March]
(mainly North America)
Default start time: [March]
Default end time: [November]
Week
Select the week to start/end daylight saving time.
(mainly Europe)
Default start time: Last week
Default end time: Last week
(mainly Asia)
Default start time: Last week
Default end time: [1st]
(mainly North America)
Default start time: [2nd]
Default end time: [1st]
Day of the Week
Select the day of the week to start/end daylight saving time. When [5th] is selected for [Week] and the specified day of the week does not exist in the 5th week, the day of the week is specified as the day of the 4th week.
Default: [Sunday]
Hour
Specify the hour to start/end daylight saving time in steps of one hour.
(mainly Europe)
Default start time: [0]
Default end time: [1]
(mainly Asia)
Default start time: [0]
Default end time: [0]
(mainly North America)
Default start time: [2]
Default end time: [2]
Offset
Specify the amount of time to move the clocks forward for daylight saving time. The time can be set from 0:00 to 9:50 in steps of one minute.
Default: [1hr.0min.]