Paper Input
This section describes the parameters that can be set on [Paper Input].
Only installed trays appear on the display panel.
Be sure to set a paper type using the control panel. If you do not set it, the printing result might not be proper.
Paper Size:Bypass Tray
You can specify the paper size for the bypass tray.
Default:
(mainly Europe and Asia)
[A4
]
(mainly North America)
[81/2
11]
Paper Size(*): Trays 1 to 4
You can specify the paper size for Trays 1 to 4.
Default:
[81/2 13]
Paper Type:Bypass Tray
You can specify the paper type for the bypass tray.
Default: [Plain Paper 2]
Paper Type: Trays 1 to 4
You can specify the paper type for Trays 1 to 4.
Default: [Plain Paper 2]
Duplex Tray
You can specify the trays to be used for duplex printing. Only installed trays appear on the display panel.
Trays 1 to 4, Bypass Tray
Default: [On]
On
Off
Auto Tray Select
You can specify the trays to be selected automatically according to the paper size and type specified using the printer driver.
When custom size paper is used with the automatic tray selection function that is enabled, the size selected on the control panel has priority. When custom size is used without the automatic tray selection function that is enabled, the size selected from the printer driver has priority.
If you need to lock a tray, select the tray using both the printer driver and control panel.
Trays 1 to 4, Bypass Tray
Default: [On]
On
Off
Tray Priority
You can specify a tray to be checked first when automatic tray selection is enabled from the printer driver. The tray selected here is used when no tray is specified for a print job.
It is recommended that you load paper of the size and orientation you use most frequently in the tray selected in this setting.
Default: [Tray 1]
Tray 1
Tray 2
Tray 3
Tray 4
Bypass Tray
For details about available trays for each paper size and type, see "Recommended Paper", Specifications.