Host Interface
When administrator authentication is set, the restrictions to user operations differ depending on the "Menu Protect" setting.
Network Config. Wizard
Settings | User | Mach | N/W | File | Lv.1 | Lv.2 |
|---|---|---|---|---|---|---|
Network Config. Wizard | R | R/W | R | R | R | R |
Direct Connection Setting
Settings | User | Mach | N/W | File | Lv.1 | Lv.2 |
|---|---|---|---|---|---|---|
Direct Connection Setting | R | R/W | R | R | R | R |
Smart Device Connector
Settings | User | Mach | N/W | File | Lv.1 | Lv.2 |
|---|---|---|---|---|---|---|
Smart Device Connector | R | R/W | R | R | R | R |
I/O Buffer
Settings | User | Mach | N/W | File | Lv.1 | Lv.2 |
|---|---|---|---|---|---|---|
I/O Buffer | R | R/W | R | R | R | R |
I/O Timeout
Settings | User | Mach | N/W | File | Lv.1 | Lv.2 |
|---|---|---|---|---|---|---|
I/O Timeout | R | R/W | R | R | R | R |
DIPRINT Timeout Period
Settings | User | Mach | N/W | File | Lv.1 | Lv.2 |
|---|---|---|---|---|---|---|
DIPRINT Timeout Period | R | R/W | R | R | R | R |
Network
Settings | User | Mach | N/W | File | Lv.1 | Lv.2 |
|---|---|---|---|---|---|---|
Machine IPv4 Address*1 | R | R | R/W | R | R | R |
IPv6 Stateless Setting | R | R | R/W | R | R | R |
DHCPv6 Configuration | R | R | R/W | R | R | R |
IPsec | R | R | R/W | R | R | R |
Effective Protocol | R | R | R/W | R | R/W | R |
Ethernet Speed | R | R | R/W | R | R | R |
IEEE802.1X Auth.(Ethernet) | R | R | R/W | R | R | R |
Restr.IEEE802.1X Auth.Def. | R | R | R/W | R | R | R |
LAN Type*2 | R | R | R/W | R | R | R |
Permit SSL/TLS Comm. | R | R | R/W | R | R | R |
*1 When auto-obtain is set, the data is read-only.
*2 Appears when the optional wireless LAN board is installed.
Parallel Interface*1
Settings | User | Mach | N/W | File | Lv.1 | Lv.2 |
|---|---|---|---|---|---|---|
Parallel Timing | R | R/W | R | R | R | R |
Parallel Comm. Speed | R | R/W | R | R | R | R |
Selection Signal Status | R | R/W | R | R | R | R |
Input Prime | R | R/W | R | R | R | R |
Bidirectional Comm. | R | R/W | R | R | R | R |
*1 Appears when the optional IEEE 1284 interface board is installed.
Wireless LAN*1
Settings | User | Mach | N/W | File | Lv.1 | Lv.2 |
|---|---|---|---|---|---|---|
WLAN: EasySetup/Direct Con | R | R | R/W | R | R | R |
Communication Mode | R | R | R/W | R | R | R |
SSID Setting | R | R | R/W | R | R | R |
Ad-hoc Channel | R | R | R/W | R | R | R |
Security Method | R | R | R/W | R | R | R |
Direct Connection Settings | R | R | R/W | R | R | R |
Wireless LAN Signal | R | R | R/W | R | R | R |
Restore Defaults | R | R | R/W | R | R | R |
*1 Appears when the optional wireless LAN board is installed.
USB Port
Settings | User | Mach | N/W | File | Set |
|---|---|---|---|---|---|
Active/Inactive | – | R/W | – | – | – |
USB Settings
Settings | User | Mach | N/W | File | Set |
|---|---|---|---|---|---|
USB Speed | – | R/W | – | – | – |
Fixed USB Port | R | R/W | R | R | R |
Restore Interface Settings
Settings | User | Mach | N/W | File | Set |
|---|---|---|---|---|---|
Restore Interface Settings | – | – | – | – | – |
*1 Can be executed by the administrator with all privileges that include user administrator, machine administrator, network administrator, and file administrator privileges.