Specifications for the Main Unit
PreviousNext
Configuration:
Console
Hard disk:
320 GB × 2
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning system through CMOS
Copy process:
Dry electrostatic transfer system
Development:
Dry two-component magnetic brush development system
Fusing:
Oilless belt fusing
Resolution*1:
Scanning originals: 600 dpi
Copying: 2,400 × 4,800 dpi
Resolution*2:
2,400 × 4,800 dpi
Exposure glass:
Stationary original exposure type
Original reference position*1:
Rear left corner
Warm-up time (23°C (73.4°F), rated voltage)
300 seconds or less
Originals:
Sheet, book, three-dimensional object
Maximum original size (ADF, exposure glass):
(mainly Europe and Asia)A3
(mainly North America)11 × 17
Paper size:
Trays 1–3:
For details, see "Recommended Paper Sizes and Types", Preparation.
Duplex:
A3
, A4
, A5, A6, B4 JIS, B5 JIS, 11 × 17
, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13
, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 8K, 16K, 12 × 18
, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 13 × 191/2, 13 × 19,13 × 18
, 123/5 × 191/5, 123/5 × 181/2,SRA3, SRA4, 226 × 310 mm, 310 × 432 mm
, 81/2 × 131/2, 81/2 × 132/5Duplex (custom size):
Vertical: 105.0–330.2 mm (4.14–13.00 inches)
Horizontal: 139.7–487.7 mm (5.50–19.20 inches)
Paper weight:
Trays 1–3: For details, see "Recommended Paper Sizes and Types", Preparation.
Duplex: 52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index)
Missing image area (Copier):
For details, see "Missing image area", Preparation.
First copy/print time:
Type 1: 6.3 seconds
Type 2: 5.6 seconds
Type 3: 4.6 seconds
(A4, 81/2 × 11, delivered face down, feeding from tray 1, on the exposure glass)
Type 4: 5.6 seconds
Type 5: 4.6 seconds
(A4, 81/2 × 11, feeding from tray 1)
Copy/print speed:
Type 1: 96 sheets/minute (A4
, 81/2 × 11)Type 2: 111 sheets/minute (A4
, 81/2 × 11)Type 3: 136 sheets/minute (A4
, 81/2 × 11)Type 4: 111 sheets/minute (A4
, 81/2 × 11)Type 5: 136 sheets/minute (A4
, 81/2 × 11)
Reproduction ratio*1:
- (mainly Europe and Asia)
Preset reproduction ratios (%):
Enlargement: 400, 200, 141, 122, 115
Full size: 100
Reduction: 93, 82, 75, 71, 65, 50, 25
- (mainly North America)
Preset reproduction ratios (%):
Enlargement: 400, 200, 155, 129, 121
Full size: 100
Reduction: 93, 85, 78, 73, 65, 50, 25
Zoom: From 25–400% in increments of 1%
Maximum continuous copy/print run:
9,999 sheets
Paper capacity (80 g/m2, 20 lb. Bond):
For details, see "Recommended Paper Sizes and Types", Preparation.
Power requirements:
- (mainly Europe and Asia)
220–240 V, 16 A, 50/60 Hz
- (mainly North America)
208–240 V, 20 A, 50/60 Hz
Power consumption:
- (mainly Europe and Asia)
Main unit only
Type 1
Type 2
Type 3
Type 4
Type 5
Ready
420 W
420 W
420 W
420 W
420 W
During printing
1,800 W
2,000 W
2,250 W
1,900 W
2,200 W
Maximum
2,030 W
2,240 W
2,480 W
2,280 W
2,440 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Type 1*1
Type 2*2
Type 3*2
Type 4*2
Type 5*2
Maximum
2,840 W or less
3,010 W or less
3,350 W or less
2,810 W or less
3,150 W or less
*1 The complete system consists of the main unit, decurler unit, anti-humidity heater, three-tray wide LCT, multi bypass tray (Tray A), interposer, and Booklet Finisher SR5100.
*2 The complete system consists of the main unit, decurler unit, anti-humidity heater, three-tray wide LCT, multi bypass tray (Tray A), interposer, and Booklet Finisher SR5120.
- (mainly North America)
Main unit only
Type 1
Type 2
Type 3
Type 4
Type 5
Ready
420 W
420 W
420 W
420 W
420 W
During printing
1,800 W
2,000 W
2,250 W
1,900 W
2,200 W
Maximum
2,010 W
2,180 W
3,020 W
2,100 W
2,440 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Regarding switching to Off mode based on the Weekly Timer's event setting
Weekly Timer is a function that allows you to set the time to switch to and recover from Sleep mode or Off mode as an event each day.
By using the Weekly Timer to set to Off mode as a daily event, the power will be turned off automatically and can provide energy consumption of 1W or less.
In order to change the settings, refer to the manuals for your product.
When the Weekly Timer is set to Off mode as a daily event, the network function is disabled, thus the factory-set default value for the Weekly Timer is [Inactive].
Complete system
Type 1*1
Type 2*2
Type 3*2
Type 4*2
Type 5*2
Maximum
2,800 W or less
3,020 W or less
3,270 W or less
2,820 W or less
3,070 W or less
*1 The complete system consists of the main unit, decurler unit, anti-humidity heater, three-tray wide LCT, multi bypass tray (Tray A), interposer, and Booklet Finisher SR5100.
*2 The complete system consists of the main unit, decurler unit, anti-humidity heater, three-tray wide LCT, multi bypass tray (Tray A), interposer, and Booklet Finisher SR5120.
Dimensions:
Types 1, 2, and 3 (W × D × H up to the surface of the ADF exposure glass) *3
1,141 × 900 × 1,020 mm (45.0 × 35.5 × 40.2 inches)
Types 4, 5 (W × D × H up to the top board (excluding the control panel and the attention light) *3
1,141 × 900 × 1,020 mm (45.0 × 35.5 × 40.2 inches)
Space for main unit (W × D):
1,141 × 900 mm (45.0 × 35.5 inches)
Noise emission:
Sound power level:
Main unit only
Type 1
Type 2
Type 3
Type 4
Type 5
Stand-by
61.5 dB (A)
61.5 dB (A)
61.5 dB (A)
61.5 dB (A)
61.5 dB (A)
Copying/Printing
73.0 dB (A)
73.0 dB (A)
74.0 dB (A)
73.0 dB (A)
74.0 dB (A)
Complete system
Type 1*1
Type 2*2
Type 3*3
Type 4*2
Type 5*3
Stand-by
65.5 dB (A)
65.5 dB (A)
65.5 dB (A)
65.5 dB (A)
65.5 dB (A)
Copying/Printing
77.0 dB (A)
78.0 dB (A)
78.0 dB (A)
77.0 dB (A)
78.0 dB (A)
Sound pressure level:
Main unit only
Type 1
Type 2
Type 3
Type 4
Type 5
Stand-by
55.5 dB (A)
55.5 dB (A)
55.5 dB (A)
55.5 dB (A)
55.5 dB (A)
Copying/Printing
67.0 dB (A)
67.0 dB (A)
68.0 dB (A)
67.0 dB (A)
68.0 dB (A)
Complete system
Type 1*4
Type 2*2
Type 3*5
Type 4*2
Type 5*5
Stand-by
59.5 dB (A)
59.5 dB (A)
59.5 dB (A)
59.5 dB (A)
59.5 dB (A)
Copying/Printing
71.0 dB (A)
71.0 dB (A)
72.0 dB (A)
71.0 dB (A)
72.0 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
*1 The complete system consists of the main unit, large capacity tray (LCT), and shift tray.
*2 The complete system consists of the main unit, three-tray wide LCT, and Booklet Finisher SR5120.
*3 The complete system consists of the main unit, two-tray wide LCT, interposer, and Booklet Finisher SR5120.
*4 The complete system consists of the main unit, three-tray wide LCT, and Booklet Finisher SR5100.
*5 The complete system consists of the main unit, two-tray wide LCT, buffer pass unit, interposer, high capacity stacker, and Booklet Finisher SR5120.
Weight:
Types 1, 2, and 3:
428 kg or less (943.7 lb.)
Types 4 and 5:
413 kg or less (910.7 lb.)
*1 Type 1, 2, and 3
*2 Type 4 and 5
*3 When the main unit alone is installed, the width with the sound insulation cover attached is 1,199 mm. It is recommended to attach the sound insulation cover when the Large Capacity Tray is not attached.
We have obtained each author's permission for the use of applications including open-source software applications. For details about the copyright information for these software applications, see the file of the OSS folder on the CD-ROM supplied with the machine.
