Previous
This section explains the paper tray settings for Tray 1 to 6, Tray T1 to T4, the multi bypass tray (Tray A), Interposer Tray and Perfect Binder Interposer Tray.
You can specify the settings for the [Cover/Designation/Slip/Separation Sheet] tab on Type 1, 2, or 3 machines only.
You can use perfect binder interposer on Type 2, 3, 4, or 5 machines only.
When you assign a custom paper to a paper tray
Auto Tray Switching is used for automatically switching between trays for custom papers that have the same configured registration number.
When printing in the Auto Paper Select mode, Auto Tray Switching switches between trays that are configured for custom papers that meet all of the following conditions:
The paper type is [Plain Paper] or [Recycled Paper] and both custom papers' paper types are the same
The paper weight is [Paper Weight 2] or [Paper Weight 3] and both custom papers' paper weights are the same
Both custom papers' paper sizes are the same
If the specified size differs from the actual size of the paper loaded in the paper tray, a misfeed might occur because the correct paper size is not detected.
If you want to use preprinted paper, contact your service representative.
