Skip header
 

Attaching the tab fence in the two-tray wide Large Capacity Tray

When loading tab stock, attach the tab fence.

1Check that paper in the paper tray is not being used, and then pull the tray carefully out until it stops.

Two-tray Wide LCT illustration

2Take out the tab fence from the pocket on the right-hand side of the paper tray.

Two-tray Wide LCT illustration

3Set the side fences to the size of the tab stock to be loaded, and then load it.

Load the tab stocks with their side with the tabs facing the end fence.

4Attach the tab fence, and then align the end fence gently against the paper you loaded while pressing the release button of the end fence.

Two-tray Wide LCT illustration

5Carefully push the paper tray fully in until it clicks.

Note

  • Replace the tab fence after use.