Removing Jammed Paper

There are highly-heated parts inside the machine. When removing misfed paper, do not touch areas other than those specified in this manual. Touching those areas can result in burns.

Keep your hands clear of the paper output slot of the finisher booklet tray when pulling it out or pushing it in the finisher's staple unit. You may trap your fingers in the machine's gap and injury can result.

When replacing paper or removing jammed paper, make sure not to trap or injure your fingers.

When removing paper misfeeds, do not turn off the power. If you do, the configured functions and values will be lost.
To prevent paper misfeeds, do not leave any torn scraps of paper inside the machine.
If paper jams continue to occur, see When You Have Problems Operating the Machine, When You Cannot Make Copies As Wanted, and Other Printing Problems for details about how to resolve the problem. If the actions recommended in this manual cannot resolve the problem, contact your service representative.
When removing jammed paper, you can touch only those areas explicitly indicated in the manual.
Do not remove the fusing unit. Doing so will result in loss of print quality.
To remove paper that has not been fed into the fixing section correctly, remove the jammed paper through the underside of the fusing unit. If the jammed paper cannot be removed through the underside of the fusing unit, remove it from the top.
To remove jammed paper in the bypass tray, remove the paper that is loaded on the bypass tray.