Menu Items and Functions

0101

Image Position: With Feed

Adjust the horizontal position of the print image.

0106

Select Test Pattern for Image Position Adjustment

Select the test image for adjusting the image position.

This function is available for Type 1, 2, and 3 machines.

0108

ADF Double Feed Detection

Specify whether or not to detect multiple feeding of originals loaded in the Auto Document Feeder(ADF).

This function is available for Type 1, 2, and 3 machines.

0202

Execute Image Quality Adjustment

Adjust the toner adhesion amount to the intermediate transfer belt during the image density adjustment.

0208

Avoid Paper Transfer Shock Jitter: Feed Interval

Specify whether or not to enable the mode to reduce the jitter^*1 produced when paper enters the paper transfer roller.

0301

Double Feed Detection

Specify whether or not to detect double feeding of paper.

0302

When Double Feed is Detected

Specify how the machine behaves when it detects a double feed.

0304

Skew Detection

Specify whether or not to detect paper skew.

0310

Correct Output Paper Curl

Specify the method for straightening curled sheets.

0502

Execute Photoconductor Refreshing

Remove dust on the drum surface.

0517

Temperature / Humidity Inside

Display the internal temperature and humidity.

0518

Temperature / Humidity Outside

Display the external temperature and humidity.

0519

Display Banner for Conditions Outside Optimal Range

Specify whether or not to display the banner to indicate conditions outside the recommended operating environment.

0522

Execute Charger Cleaning

Clean the charge unit.

0523

Switch Print Screen

Set the function displayed when pressing [To Print Screen].

0601

Staple Position for Booklet

Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5120.

0602

Folding Position for Booklet

Adjust the horizontal position of the folding when using Booklet Finisher SR5120.

0603

Staple Position: Across Feed 1

Adjust the vertical position of the staple (applied at an edge) when using Finisher SR5110 or Booklet Finisher SR5120.

0604

Staple Position: Across Feed 2

Adjust the vertical distance (up and down) between the staples (dual) when using Finisher SR5110 or Booklet Finisher SR5120.

0605

Staple Position: With Feed

Adjust the horizontal position of the staples when using Finisher SR5110 or Booklet Finisher SR5120.

0606

Punch Position: Across Feed

Adjust the vertical position of the punch holes when using Finisher SR5110 or Booklet Finisher SR5120.

0607

Punch Position: With Feed

Adjust the horizontal position of the punch holes when using Finisher SR5110 or Booklet Finisher SR5120.

0609

Set Number of Folds for Booklet

Specify the number of booklet folds to be performed when using Booklet Finisher SR5120.

0637

Staple Tray: Rib Installed Mode to Strengthen Paper

Set the operation when the Paper Strengthening Rib is installed to Staple Tray when using Finisher SR5110 or Booklet Finisher SR5120.

0638

Accuracy Priority for Stapling

Set the accuracy priority for stapling.

0639

Accuracy Priority for Booklet

Set the accuracy priority for a booklet.

0701

Paper Alignment for Stapling: Across Feed

Adjust the width of the Staple Jogger^*1 when using the staple function on Finisher SR5090 or Booklet Finisher SR5100.

0702

Paper Alignment for Booklet: Across Feed

Adjust the width of the Staple Jogger^*1 when using Booklet Finisher SR5090.

0703

Staple Position

Adjust the staple positions (front and back parallel, and back slant) with across feed for each specified paper size.

0704

Staple Position for Booklet

Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5090.

0705

Folding Position for Booklet

Adjust the horizontal position of the folding when using Booklet Finisher SR5090.

0706

Folding Position for Booklet: By Number of Sheets

Adjust the folding position for a booklet by specified number of sheets with feed for each specified paper size.

0707

Number of Sheets Align for Stapling

Specify the number of sheets to align for stapling at one time.

0708

Number of Sheets Align for Booklet

Adjust the maximum number of prestack sheets for a booklet for each specified paper size.

0801

Z-fold Position 1

Adjust the fold position of the end segment (S) when using the fold unit.

0802

Z-fold Position 2

Adjust the overall fold size (L) of the Z-foldout sheets when using the fold unit.

0803

Half Fold Position: 1 sheet Fold

Adjust the edge width of the half folded sheets (1 sheet fold) when using the fold unit.

0804

Half Fold Position: Multi-sheet Fold

Adjust the edge width of the half folded sheets (multi-sheet fold) when using the fold unit.

0805

Letter Fold-out Position 1: 1 sheet Fold

Adjust the fold position of the bottom segment (S2) of letter foldout sheets (1 sheet fold) when using the fold unit.

0806

Letter Fold-out Position 1: Multi-sheet Fold

Adjust the fold position of the bottom segment of letter foldout sheets (multi-sheet fold) when using the fold unit. This setting will be applied if the multi-sheet fold function is enabled.

0807

Letter Fold-out Position 2: 1 sheet Fold

Adjust the overall fold size (L) of letter foldout sheets (1 sheet fold) when using the fold unit.

0808

Letter Fold-out Position 2: Multi-sheet Fold

Adjust the overall fold size of letter foldout sheets (multi-sheet fold) when using the fold unit. This setting will be applied if the multi-sheet fold function is enabled.

0809

Letter Fold-in Position 1: 1 sheet Fold

Adjust the fold position of the bottom segment (S) of letter fold-in sheets (1 sheet fold) when using the fold unit.

0810

Letter Fold-in Position 1: Multi-sheet Fold

Adjust the fold position of the bottom segment of letter fold-in sheets (multi-sheet fold) when using the fold unit.

0811

Letter Fold-in Position 2: 1 sheet Fold

Adjust the fold size of letter fold-in sheets (1 sheet fold) when using the fold unit.

0812

Letter Fold-in Position 2: Multi-sheet Fold

Adjust the fold size when Inside 3 Folding is executed (Overlap Folding) when using the fold unit.

0813

Double Parallel Fold Position 1

Adjust the fold position (S1) of the bottom segment 1 of double parallel-folded sheets when using the fold unit.

0814

Double Parallel Fold Position 2

Adjust the fold position (S2) of the bottom segment 2 of double parallel-folded sheets when using the fold unit.

0815

Gate Fold Position 1

Adjust the fold position (S1) of the bottom segment 1 of gatefold sheets when using the fold unit.

0816

Gate Fold Position 2

Adjust the fold position (S2) of the bottom segment 2 of gatefold sheets when using the fold unit.

0817

Gate Fold Position 3

Adjust the fold position (S3) of the bottom segment 3 of gatefold sheets when using the fold unit.

0901

Perf Bind Cvr Sht Posit: With Feed

Adjust the horizontal alignment of the cover sheet position when performing perfect binding.

0902

Perf Bind Cvr Sht Posit: Across Feed

Adjust the vertical alignment of the cover sheet position when performing perfect binding.

0903

Perfect Binding Finishing Angle

Square the top, bottom, and outside edges when trimming a deck of paper.

0904

Applying Binding Glue

Adjust the amount of binding glue for perfect binding.

1007

Maximum Stack Quantity in Stacker Tray

Set the maximum number of sheets for the stacker tray.

1101

Interposer Double Feed Detection

Set whether to detect double feed.

1102

Interposer Fan Setting

Set the fan operation for Interposer.

1103

Interposer Fan Level

Adjust the correction value for the standard value of the interposer fan level.