Problem |
Cause |
Solution |
---|---|---|
The machine is not automatically recognized. |
The USB cable is not connected properly. |
Disconnect the USB cable, and then turn off the power. Turn on the power again. When the machine has fully booted up, reconnect the USB cable. |
The machine is not automatically recognized. |
Windows has already configured the USB settings. |
|
The machine does not recognize the USB connection even when a USB cable is inserted. |
If the USB cable is connected while the machine is off, the machine might not recognize the USB connection. |
Press the [Energy Saver] key, and then disconnect the USB cable. Press the [Energy Saver] key again. When the machine has returned to the ready condition, reconnect the USB cable. |