Skip header
 

Programming or changing e-mail messages

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Press the [User Tools] (Operation panel screen illustration) icon on the [Home] screen.

3Press [Machine Features].

4Press [System Settings].

5Press [File Transfer].

6Press [Program / Change / Delete Email Message].

7Check that [Program / Change] is selected.

8Press [*Not Programmed].

To change the registered e-mail message, select the e-mail message to change.

9Press [Change] under the "Name".

10Enter a name, and then press [OK].

Enter the name up to 20 characters.

11Press [Edit].

12Enter the text, and then press [OK].

Enter up to five lines of text. Each line can consist of up to 80 characters. To start a new line, press [OK] to return to the e-mail message screen, and then press [Down arrow key] in "Select Line to Edit:".

13Press [OK].

14Press [Exit].

15Press [User Tools] (Operation panel screen illustration) on the top right of the screen.

16Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.