Skip header
 

Batch, SADF

This section explains the settings you need to configure if you want to scan a large number of originals in several batches and send them together as a single job.

Batch

If you select [Batch], scanning starts when you place the additional originals and press the [Start] key. When all the originals have been scanned, press the [Sharp] key. If you select [Batch], regardless of the default settings, the machine waits until additional originals are placed.

SADF

If [SADF] is selected, scanning starts as soon as you place additional originals in the ADF. Select which operation the machine performs while waiting for additional originals in [Wait Time for Next Original(s): SADF] under [Scanner Features]. For details about [Wait Time for Next Original(s): SADF], see "Scan Settings", Preparation.

1Press [Original Feed Type].

Operation panel screen illustration

2Select [Batch] or [SADF].

3Press [OK].

Note

  • If [SADF] is selected, scanning starts as soon as you place additional originals in the ADF. However, in the following cases you must press the [Start] key to start scanning additional originals.

    • After scanning additional originals using the exposure glass

    • After changing settings while waiting for additional originals

    • After opening/closing the ADF

  • For more details about procedures, see Scanning Multiple Pages of Originals as One File.