Skip header
 

Distributing data using distributed scan management

Configure the distributed scan management (DSM) system on Windows Server.

For the procedure to configure DSM, see Windows Server Help.

1Login to the machine using Windows authentication.

2Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

3Press the [Scanner (Classic)] icon.

4Make sure that no previous settings remain.

If a previous setting remains, press [Reset].

5Press [DSM Destination].

6Place originals.

7If necessary, specify the scan settings according to the original to be scanned.

To change the scan settings, select the [Allow value override at scanner] check box when configuring the device on Windows Server.

8Specify the destination.

9Press the [Start] key.

Note

  • Up to 100 destinations can be displayed in [DSM Destination]. If more than 100 scan processes (destinations) are registered to Windows Server, information for the 100 processes that have been registered recently will be displayed in [DSM Destination].

  • Register the destination to Windows Server.

  • The program function cannot be used with DSM.